posted in Technology

Open-source stealth USB hides an encrypted partition behind an 8GB decoy drive Phantom Drive appears as a regular USB stick until you create a text file to unlock the hidden data

www.tomshardware.com/pc-components/usb-flash-drives/open-source-stealth-usb-hides-an-encrypted-partition-behind-an-8gb-decoy-drive-phantom-drive-appears-as-a-regular-usb-stick-until-you-create-a-text-file-to-unlock-the-hidden-data
The PhantomdriveTom's HardwareOpen-source stealth USB hides an encrypted partition behind an 8GB decoy drive — 'Phantom Drive' appears as a regular USB stick until you create a text file to unlock the hidden dataA trick to break the walls of hidden partitions.

Replying to @⁨unexposedhazard@discuss.tchncs.de⁩

No it isn’t. It will be treated like any other drive where encryption is nothing new. In fact, to look for a text file and then make something accessible means it is likely much easier to detect that something is off about it than regular encryption that just looks like random data. Whether it tries to hide it’s true storage capacity or boots its own internal OS to present storage, people often think they’re being clever when really they’re just making themselves stand out.

Replying to @⁨timewarp@lemmy.world⁩

Do you think TSA/CBP is going to check the flash data lines to see if the MCU is scanning the flash internally?

This isn’t a standard USB flash controller… You would need to break the casing and physically probe it to figure out that something was off as far as I can tell. It’s not like the MCU broadcasts that it is scanning to the USB port.

You would have to be hitting the stick pretty hard, not just a normal file scan to notice the timing being slightly too long in a small portion of the scans. The bigger problem would be that the flash drive would be brand-recognizable if it ends up being mass produced that they might auto-confiscate it, and of course the default file that it searches for being known.

Replying to @⁨JustEnoughDucks@feddit.nl⁩

Do you think TSA/CBP is going to check the flash data lines to see if the MCU is scanning the flash internally?

This isn’t a standard USB flash controller… You would need to break the casing and physically probe it to figure out that something was off as far as I can tell. It’s not like the MCU broadcasts that it is scanning to the USB port.

You would have to be hitting the stick pretty hard, not just a normal file scan to notice the timing being slightly too long in a small portion of the scans. The bigger problem would be that the flash drive would be brand-recognizable if it ends up being mass produced that they might auto-confiscate it, and of course the default file that it searches for being known.

You’re proving my point. The device actually fails both ends of the threat model.

If it’s a casual check, custom hardware is total overkill. You take a standard 1 TB off-the-shelf drive formatted to its full 1 TB capacity as a single partition. You put normal files on it and hide the encrypted header—plus a lightweight host-side decryption utility/bootloader—inside a single JPEG using steganography. To any border agent, OS, or disk tool, the drive is just a healthy 1 TB partition containing readable files and residual random data from a quick format. There are no custom drivers installed, no modified media file sizes, and no missing drive space to trigger software or system flags. Once at your destination, you simply extract the utility from the JPEG on a trusted machine to mount the hidden sectors.

If it’s a high-scrutiny check, this custom hardware actively guarantees you stand out. CBP doesn’t need software checks—non-destructive X-ray imaging is standard screening. Under a scan, a mass-produced thumb drive shows a single integrated ASIC on NAND. The Phantom Drive immediately reveals a generic CH569 microcontroller, buck regulators, UART test points, etc.

It visually stands out like a neon sign under basic physical imaging. It doesn’t defeat the threat model—it actively creates the physical hardware anomaly.